Controlled air flow + Digital vision

Controlled airflow.
Digital verification.

Two test positions. One high-resolution vision system.

The StoneDDI operates in a two-test-position design to determine diffuser-stone characteristics. Its built-in high-resolution vision system captures even the smallest bubbles for reliable determination of pore diameter and permeability.

Connected + Documented

Every calibration logged.
Every result verified.

A dual-camera CCD detection system works alongside a mass flow meter and electronic pressure control to read flow and pressure directly, with a patented optical arrangement and red LED (600 nm) light source. Running on embedded Windows 10, the StoneDDI integrates seamlessly with laboratory information management systems (LIMS) over its Ethernet and USB interfaces, with an easy-to-use 10.1″ touchscreen for setup and review.

Key measuring parameters

Two parameters.
One verified diffuser profile.

1. 01

   Pore Diameter

   Size in µm.

2. 02

   Permeability

   Flow in mL/min.

3. 03

   Compliance Standards

   ASTM D892, D6082, and E128-99.

Robust by design

Three patented systems.
One compact analyzer.

1. PBT

   Peltier Boost Technology

   High-speed heating and cooling across the full measuring range.

2. CPT

   Contamination Prevention Technology

   Advanced electrode protection and a self-cleaning ignition system that minimize cleaning and maintenance.

3. PS

   Peltier separation

   Separated Peltier stages for stable thermoregulation in a smaller housing.

Compliance / Correlation

Portable enough for field.
Precise enough for lab.

ASTM D6450 · ASTM D7094

This device is fully compliant with ASTM D6450 and D7094 with a diverse array of correlation methods, making it the ideal solution for almost any flash point determination in both laboratory and on-the-go environments.

1. 01

   Temperature Range

   18 °C to 370 °C (64 °F to 689 °F), with no High Temperature Module or external cooling required.

2. 02

   Flash Point + Flash/No Flash

   Flash point corrected to sea level is displayed in units of temperature. In correlation tests: Flash versus No Flash determinations.

3. 03

   Pressure Change + Temperature

   Largest pressure difference during the flash test. Live, expected, and corrected temperatures.

Fast field + lab workflow

Ready in five minutes.
Built to move.

The system’s integrated pump, intuitive touchscreen interface, and fully automated operation simplify the testing process. The ERAJET FAME is designed for ease of use and efficiency, making it suitable for both laboratory and field applications. Its portable and robust design, with dimensions of 27.5 × 35 × 28 cm (10.8 × 13.8 × 11 in) and a weight of only 10 kg (22 lb), allows for easy transport and operation in various environments. The ERAJET FAME is also equipped with advanced data handling capabilities, including USB ports, Ethernet connectivity, and compatibility with LIMS systems, enabling seamless integration into existing workflows.

Verified for confidence

Multiple IR peaks.
One dependable decision.

ASTM D7797 · IP 583 · IP 585

The dual solid-phase extraction method, coupled with the use of multiple IR peaks for verification, provides an unmatched level of precision in FAME detection. The results are highly repeatable and reproducible.

1. 01

   FAME

   Detection range of 10–250 mg/kg for AVTUR, with a method detection limit of 10 mg/kg.

2. 02

   Precision

   Repeatability of r ≤ 4 mg/kg and reproducibility of R ≤ 6 mg/kg.

3. 03

   Interference Check

   FIC FAME Interference Check distinguishes FAME from other esters, such as plasticizers, to exclude false positives.

Designed for the everyday user

Fully automated.
Pressurized by design.

This device is designed for the everyday user and is fully automated, with minimal operator interactivity.

A small footprint, navigable interface, rugged aluminum casing, and simple operations make the ERAVAP a desirable unit for both laboratory and on-the-go vapor pressure testing. Quick connect inlets paired with a pressurized cylinder ensure LPGs maintain a pressurized environment, retaining the sample from escaping due to its high volatility.

LPG applications + Compliance

System pressure.
Safety by design.

This device is fully compliant with ASTM D6897, making it the ideal unit for R&D, QC, and many more applications using a single analyzer. It also covers ASTM D5188, D5191, D6377, D6378, and EN 13016, so gasoline and crude oil methods run on the same instrument.

Key measuring parameters

Three signals.
One LPG profile.

1. 01

   Volatility

   DVPE/RVPE measurement describing the volatility profile.

2. 02

   Pressure Distribution

   Gas (Pgas), absolute (Pabs), and total (Ptot) pressure measurements for each sample, across a 0 to 2000 kPa range.

3. 03

   Vaporization Tendency

   V/L ratio gives insight into the tendency of fuel to vaporize in an engine.

Stacked Peltier cooling

A faster descent
into the cold.

The stacked Peltier design allows measurements according to ASTM D7094 with oven temperatures as low as −40 °C, and the cooling speed of the instrument was increased by approximately 35%. With ERAFLASH LT, simple low-temperature flash point testing is possible without the need to cool the equipment with dry ice or other substances.

ASTM D7094 · −40 °C to 120 °C

Controlled cooling

Cold surface.
Clear result.

• Auto-off coolant valve
• Condensation control
• Ambient-air shield

The ERAFLASH LT flash point tester is also equipped with a coolant valve that automatically shuts the coolant flow off if not needed. This helps to eliminate condensation of humidity on the cooler. Ice formation on the oven surface during the cool-down period is prevented by using a cooling cup that shields the surface from the ambient air.

Oil-in-water detection range

0–1000 mg/L

The analysis

Three signals make
one environmental answer.

1. 01

   Cyclohexane

   CFC-free solvent used for liquid-liquid and solid-liquid extraction.

2. 02

   IR spectrometry

   High-precision infrared measurement of the extracted sample.

3. 03

   TOG + TPH

   Two essential contamination results from a single run.

Key measuring parameters

Built for the water
that cannot be overlooked.

1. TOG

   Total Oil and Grease

   0–1000 mg/L

2. TPH

   Total Petroleum Hydrocarbons

   0–1000 mg/L