Controlled air flow + Digital vision

Controlled airflow.
Digital verification.

Two test positions. One high-resolution vision system.

The StoneDDI operates in a two-test-position design to determine diffuser-stone characteristics. Its built-in high-resolution vision system captures even the smallest bubbles for reliable determination of pore diameter and permeability.

Connected + Documented

Every calibration logged.
Every result verified.

A dual-camera CCD detection system works alongside a mass flow meter and electronic pressure control to read flow and pressure directly, with a patented optical arrangement and red LED (600 nm) light source. Running on embedded Windows 10, the StoneDDI integrates seamlessly with laboratory information management systems (LIMS) over its Ethernet and USB interfaces, with an easy-to-use 10.1″ touchscreen for setup and review.

Key measuring parameters

Two parameters.
One verified diffuser profile.

1. 01

   Pore Diameter

   Size in µm.

2. 02

   Permeability

   Flow in mL/min.

3. 03

   Compliance Standards

   ASTM D892, D6082, and E128-99.

Minimal sample

Two cubic centimeters.
One precise answer.

ERADENS X combines a compact 32 × 16 × 34 cm design, a lightweight 7 kg build, and easy operation. It requires only a 2 cm³ sample and provides rapid results within 15 seconds after temperature equilibrium is reached. Its integrated color touchscreen simplifies operation, while USB, Ethernet, and RS-232 connectivity allow seamless transfer to LIMS, PCs, or printers. FillingProof™ technology provides automated bubble detection to verify bubble-free sample filling.

Range + Precision

Wide range.
Fine resolution.

What makes the ERADENS X unique is its combination of portability, precision, and robustness. The device is exceptionally durable and accurate, producing results that are highly reproducible and repeatable across the full measuring range.

Fast field + lab workflow

Ready in five minutes.
Built to move.

The system’s integrated pump, intuitive touchscreen interface, and fully automated operation simplify the testing process. The ERAJET FAME is designed for ease of use and efficiency, making it suitable for both laboratory and field applications. Its portable and robust design, with dimensions of 27.5 × 35 × 28 cm (10.8 × 13.8 × 11 in) and a weight of only 10 kg (22 lb), allows for easy transport and operation in various environments. The ERAJET FAME is also equipped with advanced data handling capabilities, including USB ports, Ethernet connectivity, and compatibility with LIMS systems, enabling seamless integration into existing workflows.

Verified for confidence

Multiple IR peaks.
One dependable decision.

ASTM D7797 · IP 583 · IP 585

The dual solid-phase extraction method, coupled with the use of multiple IR peaks for verification, provides an unmatched level of precision in FAME detection. The results are highly repeatable and reproducible.

1. 01

   FAME

   Detection range of 10–250 mg/kg for AVTUR, with a method detection limit of 10 mg/kg.

2. 02

   Precision

   Repeatability of r ≤ 4 mg/kg and reproducibility of R ≤ 6 mg/kg.

3. 03

   Interference Check

   FIC FAME Interference Check distinguishes FAME from other esters, such as plasticizers, to exclude false positives.

Stacked Peltier cooling

A faster descent
into the cold.

The stacked Peltier design allows measurements according to ASTM D7094 with oven temperatures as low as −40 °C, and the cooling speed of the instrument was increased by approximately 35%. With ERAFLASH LT, simple low-temperature flash point testing is possible without the need to cool the equipment with dry ice or other substances.

ASTM D7094 · −40 °C to 120 °C

Controlled cooling

Cold surface.
Clear result.

• Auto-off coolant valve
• Condensation control
• Ambient-air shield

The ERAFLASH LT flash point tester is also equipped with a coolant valve that automatically shuts the coolant flow off if not needed. This helps to eliminate condensation of humidity on the cooler. Ice formation on the oven surface during the cool-down period is prevented by using a cooling cup that shields the surface from the ambient air.

Oil-in-water detection range

0–1000 mg/L

The analysis

Three signals make
one environmental answer.

1. 01

   Cyclohexane

   CFC-free solvent used for liquid-liquid and solid-liquid extraction.

2. 02

   IR spectrometry

   High-precision infrared measurement of the extracted sample.

3. 03

   TOG + TPH

   Two essential contamination results from a single run.

Key measuring parameters

Built for the water
that cannot be overlooked.

1. TOG

   Total Oil and Grease

   0–1000 mg/L

2. TPH

   Total Petroleum Hydrocarbons

   0–1000 mg/L