Robust by design

Three patented systems.
One compact analyzer.

1. PBT

   Peltier Boost Technology

   High-speed heating and cooling across the full measuring range.

2. CPT

   Contamination Prevention Technology

   Advanced electrode protection and a self-cleaning ignition system that minimize cleaning and maintenance.

3. PS

   Peltier separation

   Separated Peltier stages for stable thermoregulation in a smaller housing.

Compliance / Correlation

Portable enough for field.
Precise enough for lab.

ASTM D6450 · ASTM D7094

This device is fully compliant with ASTM D6450 and D7094 with a diverse array of correlation methods, making it the ideal solution for almost any flash point determination in both laboratory and on-the-go environments.

1. 01

   Temperature Range

   18 °C to 370 °C (64 °F to 689 °F), with no High Temperature Module or external cooling required.

2. 02

   Flash Point + Flash/No Flash

   Flash point corrected to sea level is displayed in units of temperature. In correlation tests: Flash versus No Flash determinations.

3. 03

   Pressure Change + Temperature

   Largest pressure difference during the flash test. Live, expected, and corrected temperatures.

Stacked Peltier cooling

A faster descent
into the cold.

The stacked Peltier design allows measurements according to ASTM D7094 with oven temperatures as low as −40 °C, and the cooling speed of the instrument was increased by approximately 35%. With ERAFLASH LT, simple low-temperature flash point testing is possible without the need to cool the equipment with dry ice or other substances.

ASTM D7094 · −40 °C to 120 °C

Controlled cooling

Cold surface.
Clear result.

• Auto-off coolant valve
• Condensation control
• Ambient-air shield

The ERAFLASH LT flash point tester is also equipped with a coolant valve that automatically shuts the coolant flow off if not needed. This helps to eliminate condensation of humidity on the cooler. Ice formation on the oven surface during the cool-down period is prevented by using a cooling cup that shields the surface from the ambient air.

High-volume autosampling

Load the sequence.
Let S10 keep testing.

With the distinct capability to incorporate both a high temperature and a low temperature module, this singular analyzer can cover a temperature range from −25 °C to 420 °C with only 1–2 mL of sample per test. To complete a test, the device produces an electric arc in a closed chamber to determine at which temperature the arc ignites the sample vapor, which is measured by the pressure change observed in ignition. The notable feature of the ERAFLASH S10 is the built-in autosampler, making it the ideal solution for unattended flash point testing.

Built for unattended flash point testing

Compliance / Correlation

Standards-ready.
High-volume capable.

ASTM D6450 · ASTM D7094

This device is fully compliant with ASTM D6450 and D7094 with a diverse array of correlation methods, making it the ideal solution for almost any flash point determination in both laboratory and on-the-go environments.

1. 01

   Temperature Range

   −25 °C to 420 °C (−13 °F to 788 °F). Stand-alone range is 0 °C to 200 °C; the low end requires external cooling and the high end the optional High Temperature Module.

2. 02

   Flash Point + Flash/No Flash

   Flash point corrected to sea level is displayed in units of temperature. In correlation tests: Flash versus No Flash determinations.

3. 03

   Pressure Change + Temperature

   Largest pressure difference during the flash test. Live, expected, and corrected temperatures.

4. 04

   Unattended Throughput

   Ten loaded samples in approximately 45 minutes, depending on temperature range.

Cold start → High heat

Cold start to high heat.
One analyzer.

With the distinct capability to incorporate both a high temperature and low temperature module, this singular analyzer can cover a temperature range from -25C to 420C with only 1-2mL of sample per test.

To complete a test, the device produces an electric arc in a closed chamber to determine at which temperature the arc ignites the sample vapor, which is measured by the pressure change observed in ignition. Another feature of the ERAFLASH is the built-in unknown sample screen test which can quickly cover a wide range of temperatures to hone in on the specific flash point of unidentifiable samples or samples with unknown flash points.

Measured across the full range

Every measurement.
Across the full range.

1. 01

   Temperature Range

   −25 °C to 420 °C (−13 °F to 788 °F)

2. 02

   Flash Point + Flash/No Flash

   Flash point corrected to sea level is displayed in units of temperature. In correlation tests: Flash versus No Flash determinations.

3. 03

   Pressure Change + Temperature

   Largest pressure difference during flash test. Live, expected, and corrected temperatures.